Post by account_disabled on Dec 1, 2017 8:34:50 GMT 2
I am try to download program from laptop to OP3 via USB/RS232 converter but I cannot do that anh on Protool occur error as follow :
E4017: Protocol error with serial connection for lines FFFF021BH
No connection to the OP!
I ready change OP3 to transfer mode and do anything as OP3 documentation. I also try to change parameter of port (COM 2) as stop bit, parity bit . . . but above error always occur.
I don't know what wrong, it may be because USB to RS232 converter cannot support ??
Please help.
Thanks!
I didn't find the right solution from the Internet.
References support.industry.siemens.com/tf/WW/en/posts/cannot-download-program-from-laptop-to-op3/34342?page=0&pageSize=10
business Motion Graphic Animation
E4017: Protocol error with serial connection for lines FFFF021BH
No connection to the OP!
I ready change OP3 to transfer mode and do anything as OP3 documentation. I also try to change parameter of port (COM 2) as stop bit, parity bit . . . but above error always occur.
I don't know what wrong, it may be because USB to RS232 converter cannot support ??
Please help.
Thanks!
I didn't find the right solution from the Internet.
References support.industry.siemens.com/tf/WW/en/posts/cannot-download-program-from-laptop-to-op3/34342?page=0&pageSize=10
business Motion Graphic Animation